Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL git-deploy-6.00 v5.14.2 NetBSD
Date: 2012-09-04T14:50:13Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear AVAR,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9130. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.14.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_compile.t .. ok
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy start >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: Illegal seek'
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'We created a tag because there wasn't one already'
# at t/run.t line 16.
# ''
# doesn't match '(?^:debug)'
# Failed test 'We print a notice about the deploy being started'
# at t/run.t line 17.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Deploy procedure has started)'
# Failed test 'By default we don't send mail on 'start''
# at t/run.t line 18.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action)'
# Failed test 'We push any tags we have to origin on startup'
# at t/run.t line 19.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy status >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <0>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 26.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout started - not synced yet)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy sync >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'XXX: On our first sync we bitch about the tag we just made. We shouldn't do that.'
# at t/run.t line 34.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:It seems like there is nothing to sync)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy --force sync >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <1>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'XXX: On our first sync we bitch about the tag we just made. We shouldn't do that.'
# at t/run.t line 46.
# '# INFO : Starting step 'sync' at 2012-09-04 15:50:03
# # FATAL: It looks like you havent started yet!
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:--force enabling rolling out same thing you had when you started)'
# Failed test 'We don't have any sync hook yet'
# at t/run.t line 51.
# '# INFO : Starting step 'sync' at 2012-09-04 15:50:03
# # FATAL: It looks like you havent started yet!
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:You must now hand execute the synchronization process and then execute)'
# Failed test 'Should be in output: Step 'sync' finished'
# at t/run.t line 60.
# '# INFO : Starting step 'sync' at 2012-09-04 15:50:03
# # FATAL: It looks like you havent started yet!
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'sync' finished)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 60.
# '# INFO : Starting step 'sync' at 2012-09-04 15:50:03
# # FATAL: It looks like you havent started yet!
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Not sending mail on action 'sync''
# at t/run.t line 60.
# '# INFO : Starting step 'sync' at 2012-09-04 15:50:03
# # FATAL: It looks like you havent started yet!
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action 'sync')'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy status >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <0>, but we wanted <2>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 71.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout tagged - awaiting sync)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy finish >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'Should be in output: Looks like you are all done! Have a nice day'
# at t/run.t line 81.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Looks like you are all done! Have a nice day)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 81.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Step 'finish' finished.'
# at t/run.t line 81.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'finish' finished.)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy start >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'We finished the start step'
# at t/run.t line 98.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'start' finished)'
# Failed test 'We have stuff in 'log''
# at t/run.t line 111.
# ''
# doesn't match '(?^:This is a commit message)'
# Failed test 'We have stuff in 'diff''
# at t/run.t line 121.
# ''
# doesn't match '(?^:CHANGES)'
# Failed test 'The tag we had before rollout is <>'
# at t/run.t line 132.
# ''
# doesn't match '(?^:^debug-)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy sync >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'Should be in output: It looks like there are unpushed commits'
# at t/run.t line 143.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:It looks like there are unpushed commits)'
# Failed test 'Should be in output: Most likely this is harmless'
# at t/run.t line 143.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Most likely this is harmless)'
# Failed test 'We should get a commit message in the output'
# at t/run.t line 146.
# ''
# doesn't match '(?^:This is a commit message)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy status >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <0>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 157.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout started - not synced yet)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy sync >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'We don't have any sync hook yet'
# at t/run.t line 167.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:You must now hand execute the synchronization process and then execute)'
# Failed test 'Should be in output: Step 'sync' finished'
# at t/run.t line 176.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'sync' finished)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 176.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Not sending mail on action 'sync''
# at t/run.t line 176.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action 'sync')'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy status >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <0>, but we wanted <2>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy finish >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'Should be in output: Looks like you are all done! Have a nice day'
# at t/run.t line 196.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Looks like you are all done! Have a nice day)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 196.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Step 'finish' finished.'
# at t/run.t line 196.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'finish' finished.)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy revert 2 >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'Should be in output: You've selected the choice <2>'
# at t/run.t line 210.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:You've selected the choice <2>)'
# Failed test 'Should be in output: The following commits are available'
# at t/run.t line 210.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# '
# doesn't match '(?^:The following commits are available)'
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy sync >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
# Failed test 'The command </home/cpan/pit/bare/perl-5.14.2/bin/perl -I/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/git-deploy-lib /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy finish >/tmp/git-deploy-3G6Ml/output/last_stdout 2>/tmp/git-deploy-3G6Ml/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/bin/git-deploy line 45.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
# Looks like you failed 47 tests of 89.
# Failed test 'A rollout etc.'
# at t/lib/Git/Deploy/Test.pm line 98.
# Looks like you failed 1 test of 1.
t/run.t .........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/run.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=2, Tests=12, 14 wallclock secs ( 0.02 usr 0.19 sys + 4.47 cusr 7.57 csys = 12.25 CPU)
Result: FAIL
Stop.
make: stopped in /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00
Failed 1/2 test programs. 1/12 subtests failed.
*** Error code 1
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.20 0
Cwd 3.36 0
Data::Dumper 2.130_02 0
Exporter 5.64_03 0
Fcntl 1.11 0
File::Basename 2.82 0
File::Find 1.19 0
File::Spec::Functions 3.33 0
File::Temp 0.22 0
FindBin 1.50 0
Getopt::Long 2.38 0
Memoize 1.02 0
POSIX 1.24 0
Pod::Usage 1.36 0
Sys::Hostname 1.16 0
Term::ReadLine 1.07 0
Test::More 0.98 0
Time::HiRes 1.9721_01 0
base 2.16 0
constant 1.21 0
strict 1.04 0
warnings 1.12 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9130
CPANPLUS::Dist::Build 0.62
Cwd 3.36
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.4003
Test::Harness 3.25
Test::More 0.98
version 0.99
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.84.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/script:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/lib:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 5039
PERL5_CPANPLUS_IS_VERSION = 0.9130
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.14.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.14.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Platform:
osname=netbsd, osvers=5.1, archname=amd64-netbsd
uname='netbsd necrosis.bingosnet.co.uk 5.1 netbsd 5.1 (generic) #0: sat nov 6 13:19:33 utc 2010 builds@b6.netbsd.org:homebuildsabnetbsd-5-1-releaseamd64201011061943z-objhomebuildsabnetbsd-5-1-releasesrcsysarchamd64compilegeneric amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.14.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
ccversion='', gccversion='4.1.3 20080704 prerelease (NetBSD nb2 20081120)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix
perllibs=-lm -lcrypt -lutil -lc -lposix
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Built under netbsd
Compiled at Nov 30 2011 17:01:52
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/lib:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="5039"
PERL5_CPANPLUS_IS_VERSION="0.9130"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.14.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/lib
/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/git-deploy-6.00/blib/arch
/home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2/amd64-netbsd
/home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2
/home/cpan/pit/bare/perl-5.14.2/lib/5.14.2/amd64-netbsd
/home/cpan/pit/bare/perl-5.14.2/lib/5.14.2
.