Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Scope-Upper-0.31 5.28.0 GNU/Linux
Date: 2018-08-29T14:29:46Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Vincent Pit,
This is a computer-generated report for Scope-Upper-0.31
on perl 5.28.0, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Upper.bs blib/arch/auto/Scope/Upper/Upper.bs 644
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Scope::Upper 0.31, Perl 5.028000, /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/bin/perl
t/00-load.t ...................... ok
t/01-import.t .................... ok
t/05-words.t ..................... ok
t/06-want_at.t ................... ok
t/07-context_info.t .............. ok
t/09-load-threads.t .............. skipped: This perl wasn't built to support threads
t/11-reap-level.t ................ ok
t/12-reap-block.t ................ ok
t/13-reap-ctl.t .................. ok
t/15-reap-multi.t ................ ok
t/16-reap-numerous.t ............. ok
t/20-localize-target.t ........... ok
t/21-localize-level.t ............ ok
t/22-localize-block.t ............ ok
t/23-localize-ctl.t .............. ok
t/24-localize-magic.t ............ ok
t/25-localize-multi.t ............ ok
t/26-localize-numerous.t ......... ok
t/30-localize_elem-target.t ...... ok
t/31-localize_elem-level.t ....... ok
t/32-localize_elem-block.t ....... ok
t/34-localize_elem-magic.t ....... ok
t/36-localize_elem-numerous.t .... ok
t/40-localize_delete-target.t .... ok
t/41-localize_delete-level.t ..... ok
t/44-localize_delete-magic.t ..... ok
t/46-localize_delete-numerous.t .. ok
t/50-unwind-target.t ............. ok
t/51-unwind-multi.t .............. ok
t/52-unwind-context.t ............ ok
t/53-unwind-misc.t ............... ok
t/54-unwind-threads.t ............ skipped: This perl wasn't built to support threads
t/55-yield-target.t .............. ok
t/57-yield-context.t ............. ok
t/58-yield-misc.t ................ ok
t/59-yield-threads.t ............. skipped: This perl wasn't built to support threads
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/60-uplevel-target.t ............
Failed 40/93 subtests
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/61-uplevel-args.t ..............
Failed 257/297 subtests
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/62-uplevel-return.t ............
Failed 25/69 subtests
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/63-uplevel-ctl.t ...............
Failed 47/51 subtests
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/64-uplevel-caller.t ............
Failed 8/32 subtests
t/65-uplevel-multi.t ............. ok
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/66-uplevel-context.t ...........
Failed 6/6 subtests
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/67-uplevel-scope.t .............
Failed 20/20 subtests
t/69-uplevel-threads.t ........... skipped: This perl wasn't built to support threads
t/70-uid-target.t ................ ok
t/74-uid-validate.t .............. ok
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/75-uid-uplevel.t ...............
Failed 106/106 subtests
t/79-uid-threads.t ............... skipped: This perl wasn't built to support threads
t/81-stress-level.t .............. ok
t/84-stress-unwind.t ............. ok
t/85-stress-yield.t .............. ok
t/86-stress-uplevel.t ............ ok
perl: Upper.xs:2030: su_uplevel_runops_hook_entersub: Assertion `((void*)(((av)->sv_u.svu_array))) != 0' failed.
t/87-stress-uid.t ................
All 385 subtests passed
Test Summary Report
-------------------
t/60-uplevel-target.t (Wstat: 134 Tests: 53 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 93 tests but ran 53.
t/61-uplevel-args.t (Wstat: 134 Tests: 40 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 297 tests but ran 40.
t/62-uplevel-return.t (Wstat: 134 Tests: 44 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 69 tests but ran 44.
t/63-uplevel-ctl.t (Wstat: 134 Tests: 4 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 51 tests but ran 4.
t/64-uplevel-caller.t (Wstat: 134 Tests: 24 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 32 tests but ran 24.
t/66-uplevel-context.t (Wstat: 134 Tests: 0 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 6 tests but ran 0.
t/67-uplevel-scope.t (Wstat: 134 Tests: 0 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/75-uid-uplevel.t (Wstat: 134 Tests: 0 Failed: 0)
Non-zero wait status: 134
Parse errors: Bad plan. You planned 106 tests but ran 0.
t/87-stress-uid.t (Wstat: 134 Tests: 385 Failed: 0)
Non-zero wait status: 134
Parse errors: No plan found in TAP output
Files=54, Tests=101136, 25 wallclock secs ( 4.81 usr 0.46 sys + 6.08 cusr 1.22 csys = 12.57 CPU)
Result: FAIL
Failed 9/54 test programs. 0/101136 subtests failed.
Makefile:1067: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- -------- --------
base 0 2.27
Exporter 0 5.73
perl 5.006001 5.028000
XSLoader 0 0.30
build_requires:
Module Need Have
------------------- -------- --------
base 0 2.27
Config 0 5.028000
Exporter 0 5.73
ExtUtils::MakeMaker 0 7.34
POSIX 0 1.84
Test::More 0 1.302136
XSLoader 0 0.30
configure_requires:
Module Need Have
------------------- -------- --------
Config 0 5.028000
ExtUtils::MakeMaker 0 7.34
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 30692
PERL5_CPAN_IS_RUNNING = 30692
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.20
CPAN::Meta 2.150010
Cwd 3.74
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.39
File::Spec 3.74
JSON 2.97001
JSON::PP 2.97001
Module::Build 0.4224
Module::Signature 0.83
Parse::CPAN::Meta 2.150010
Test::Harness 3.42
Test::More 1.302136
YAML 1.26
YAML::Syck 1.30
version 0.9923
--
Summary of my perl5 (revision 5 version 28 subversion 0) configuration:
Commit id: 6cb72a3d7fbefb477b95588e2fd81e33073da8b3
Platform:
osname=linux
osvers=4.14.0-3-amd64
archname=x86_64-linux-ld
uname='linux k93msid 4.14.0-3-amd64 #1 smp debian 4.14.12-2 (2018-01-06) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43 -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Duselongdouble -DEBUGGING=both'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2 -g'
cppflags='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='7.2.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.26.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.26'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
DEBUGGING
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jun 23 2018 07:17:35
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="30692"
PERL5_CPAN_IS_RUNNING="30692"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/lib/site_perl/5.28.0/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/lib/site_perl/5.28.0
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/lib/5.28.0/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.28.0/fc43/lib/5.28.0
.