Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Expect-1.23 v5.18.0 OpenBSD
Date: 2014-07-29T17:54:42Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SZABGAB,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9152. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.18.0/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Basic tests...
# Testing exec failure...
# Testing exp_continue...
# number of timeout calls in 5 sec: 4
# timeout shouldn't destroy accum contents
# Testing -notransfer...
# Testing raw reversing...
# isatty($exp): YES
# Called: 3
# Elapsed time: 7 delay by expect: 4.5
# Elapsed time: 7 delay by expect: 3.9
# Elapsed time: 7 delay by expect: 4.3
# Called: 3
# Check if the raw pty can handle large chunks of text at once
# ------------------------------------------------------------------------------
# The following tests check system-dependend behaviour, so even if some fail,
# Expect might still be perfectly usable for you!
# ------------------------------------------------------------------------------
# Length: 512
# Good, your raw pty can handle lines of at least 512 bytes at a time.
# Status: match
# Check if the default pty can handle large chunks of text at once
# ------------------------------------------------------------------------------
# The following tests check system-dependend behaviour, so even if some fail,
# Expect might still be perfectly usable for you!
# ------------------------------------------------------------------------------
# Length: 164
# Good, your default pty can handle lines of at least 164 bytes at a time.
# Status: match
# Testing controlling terminal...
# Checking if exit status is returned correctly...
# soft_close: 0x2A00
# Checking if signal exit status is returned correctly...
# soft_close: 0x8F00
#
# Checking if EOF on pty slave is correctly reported to master...
# (this fails on about 50% of the supported systems, so don't panic!
# Expect will work anyway!)
#
t/01-test.t .. ok
# This test will almost certainly fail on OSX. You can install the module skipping this test, but please report the failure.
no warranty
# Child (raw_pty_bc) exited without calling finalize()
# Failed test 'raw_pty_bc'
# at /home/cpan/pit/bare/perl-5.18.0/lib/5.18.0/Test/Builder.pm line 276.
# Looks like you failed 1 test of 1.
# Looks like your test exited with 255 just after 1.
t/02-bc.t ....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/02-bc.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Files=2, Tests=14, 45 wallclock secs ( 0.06 usr 0.05 sys + 0.59 cusr 2.93 csys = 3.63 CPU)
Result: FAIL
Failed 1/2 test programs. 1/14 subtests failed.
*** Error 255 in /home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23 (Makefile:858 'test_dynamic')
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.29 0
Exporter 5.68 0
Fcntl 1.11 0
File::Temp 0.2304 0
IO::Handle 1.34 0
IO::Pty 1.11 1.11
IO::Tty 1.11 1.11
POSIX 1.32 0
Test::More 1.001003 1.00
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9152
CPANPLUS::Dist::Build 0.78
Cwd 3.47
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.17
ExtUtils::Install 1.68
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.64
ExtUtils::ParseXS 3.24
File::Spec 3.47
Module::Build 0.4206
Pod::Parser 1.60
Pod::Simple 3.28
Test::Harness 3.32
Test::More 1.001003
version 0.9908
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/IO-Tty-1.11/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/IO-Tty-1.11/blib/arch:/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 10171
PERL5_CPANPLUS_IS_VERSION = 0.9152
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.18.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.18.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 0) configuration:
Platform:
osname=openbsd, osvers=5.5, archname=OpenBSD.amd64-openbsd
uname='openbsd oedolyn.bingosnet.co.uk 5.5 generic#271 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.18.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.5'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.73.1, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MYMALLOC PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under openbsd
Compiled at May 8 2014 18:11:15
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/IO-Tty-1.11/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/IO-Tty-1.11/blib/arch:/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="10171"
PERL5_CPANPLUS_IS_VERSION="0.9152"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.18.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/IO-Tty-1.11/blib/lib
/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/IO-Tty-1.11/blib/arch
/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23/blib/lib
/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/Expect-1.23/blib/arch
/home/cpan/pit/bare/perl-5.18.0/lib/site_perl/5.18.0/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.18.0/lib/site_perl/5.18.0
/home/cpan/pit/bare/perl-5.18.0/lib/5.18.0/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.18.0/lib/5.18.0
.