Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Net--RabbitMQ-0.2.8 v5.18.1 FreeBSD
Date: 2015-01-23T20:30:56Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear JESUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9152. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Running Mkbootstrap for Net::RabbitMQ ()
chmod 644 "RabbitMQ.bs"
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/64bit/perl-5.18.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_declare_exchange.t ............ ok
t/002_publish.t ..................... ok
Died at t/003_consume.t line 20.
# Looks like you planned 7 tests but ran 5.
t/003_consume.t .....................
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 2/7 subtests
# Looks like your test exited with 4 just after 5.
t/004_selfconsume.t ................. ok
t/005_noack.t ....................... ok
t/006_txn.t ......................... ok
t/007_get.t ......................... ok
t/008_queue_declare.t ............... ok
t/009_no_route.t .................... ok
t/010_qos.t ......................... ok
# Sleeping for 5 seconds
# Sleeping for 1 seconds
t/011_hearbeat.t .................... ok
t/012_timeout.t ..................... ok
Can't locate Variable/Magic.pm in @INC (you may need to install the Variable::Magic module) (@INC contains: /usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/lib /usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/arch /usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/lib /usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/arch /usr/home/cpan/pit/64bit/perl-5.18.1/lib/site_perl/5.18.1/i386-freebsd-64int /usr/home/cpan/pit/64bit/perl-5.18.1/lib/site_perl/5.18.1 /usr/home/cpan/pit/64bit/perl-5.18.1/lib/5.18.1/i386-freebsd-64int /usr/home/cpan/pit/64bit/perl-5.18.1/lib/5.18.1 .) at t/013_headers.t line 3.
BEGIN failed--compilation aborted at t/013_headers.t line 3.
t/013_headers.t .....................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 20/20 subtests
# Looks like your test exited with 2 before it could output anything.
# Using queue amq.gen-kN1lWpMUl-mPPIFiHqTiYA
t/014_bind_with_headers.t ........... ok
t/015_declare_queue_with_headers.t .. ok
t/016_reject.t ...................... ok
Test Summary Report
-------------------
t/003_consume.t (Wstat: 1024 Tests: 5 Failed: 0)
Non-zero exit status: 4
Parse errors: Bad plan. You planned 7 tests but ran 5.
t/013_headers.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 20 tests but ran 0.
Files=16, Tests=141, 38 wallclock secs ( 0.05 usr 0.02 sys + 0.27 cusr 0.11 csys = 0.45 CPU)
Result: FAIL
Failed 2/16 test programs. 0/141 subtests failed.
*** Error code 255
Stop.
make: stopped in /usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Variable::Magic
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'JESUS (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Variable::Magic' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.04 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9152
CPANPLUS::Dist::Build 0.78
Cwd 3.47
ExtUtils::CBuilder 0.280220
ExtUtils::Command 1.17
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.04
ExtUtils::Manifest 1.69
ExtUtils::ParseXS 3.24
File::Spec 3.47
Module::Build 0.4210
Pod::Parser 1.60
Pod::Simple 3.28
Test::Harness 3.34
Test::More 1.001009
version 0.9909
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 57259
PERL5_CPANPLUS_IS_VERSION = 0.9152
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/64bit/conf/perl-5.18.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/64bit/perl-5.18.1/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 1) configuration:
Platform:
osname=freebsd, osvers=10.1-release, archname=i386-freebsd-64int
uname='freebsd firws 10.1-release freebsd 10.1-release #0 r274401: tue nov 11 22:51:51 utc 2014 root@releng1.nyi.freebsd.org:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/64bit/perl-5.18.1 -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 3.4.1 (tags/RELEASE_34/dot1-final 208032)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF
Built under freebsd
Compiled at Dec 9 2014 11:04:27
%ENV:
PERL5LIB=":/usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="57259"
PERL5_CPANPLUS_IS_VERSION="0.9152"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/64bit/conf/perl-5.18.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/lib
/usr/home/cpan/pit/64bit/conf/perl-5.18.1/.cpanplus/5.18.1/build/Net--RabbitMQ-0.2.8/blib/arch
/usr/home/cpan/pit/64bit/perl-5.18.1/lib/site_perl/5.18.1/i386-freebsd-64int
/usr/home/cpan/pit/64bit/perl-5.18.1/lib/site_perl/5.18.1
/usr/home/cpan/pit/64bit/perl-5.18.1/lib/5.18.1/i386-freebsd-64int
/usr/home/cpan/pit/64bit/perl-5.18.1/lib/5.18.1
.