Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Class-Lite-v0.1.0 v5.8.9 OpenBSD
Date: 2013-04-13T12:31:26Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear XIONG,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9134. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Use of uninitialized value in length at /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/Module/Build/Base.pm line 2767.
t/102-simple.t ........... ok
Can't locate parent.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9 /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9 .) at t/104-subclass.t line 18.
BEGIN failed--compilation aborted at t/104-subclass.t line 18.
t/104-subclass.t .........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/106-no-acc.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate parent.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9 /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9 .) at t/106-no-acc.t line 18.
BEGIN failed--compilation aborted at t/106-no-acc.t line 18.
Can't locate parent.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9 /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9 .) at t/108-mi-one.t line 18.
BEGIN failed--compilation aborted at t/108-mi-one.t line 18.
t/108-mi-one.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate parent.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/5.8.9 /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/OpenBSD.amd64-openbsd /home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9 .) at t/110-mi-two.t line 20.
BEGIN failed--compilation aborted at t/110-mi-two.t line 20.
t/110-mi-two.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/112-errors.t ........... ok
t/114-edge-case-one.t .... ok
t/116-edge-case-two.t .... ok
Possible unintended interpolation of @accessors in string at t/118-edge-case-three.t line 31.
Global symbol "@accessors" requires explicit package name at t/118-edge-case-three.t line 31.
syntax error at t/118-edge-case-three.t line 34, near "return"
Global symbol "@accessors" requires explicit package name at t/118-edge-case-three.t line 34.
BEGIN not safe after errors--compilation aborted at t/118-edge-case-three.t line 33.
t/118-edge-case-three.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/150-override-acc.t ..... ok
# Failed test 'recursive inheritance'
# at t/160-recursive-fatal.t line 20.
# ''
# doesn't match '(?-xism:Recursive inheritance)'
# Looks like you failed 1 test of 1.
t/160-recursive-fatal.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/162-undef.t ............ ok
t/164-aryref.t ........... ok
t/170-diamond-one.t ...... ok
t/172-diamond-two.t ...... ok
Test Summary Report
-------------------
t/104-subclass.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/106-no-acc.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/108-mi-one.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/110-mi-two.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/118-edge-case-three.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/160-recursive-fatal.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=15, Tests=64, 0 wallclock secs ( 0.02 usr 0.04 sys + 0.19 cusr 0.14 csys = 0.39 CPU)
Result: FAIL
Failed 6/15 test programs. 1/64 subtests failed.
BEGIN failed--compilation aborted at -e line 1.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
parent
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'XIONG (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'parent' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.98 0.94
version 0.9902 0.99
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9134
CPANPLUS::Dist::Build 0.70
Cwd 3.40
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.64
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.18
File::Spec 3.40
Module::Build 0.4003
Pod::Parser 1.35
Pod::Simple 0
Test::Harness 3.26
Test::More 0.98
version 0.9902
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.86.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 1531
PERL5_CPANPLUS_IS_VERSION = 0.9134
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=openbsd, osvers=5.1, archname=OpenBSD.amd64-openbsd
uname='openbsd oliphant.bingosnet.co.uk 5.1 generic#181 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.1'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.62.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MYMALLOC PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_FAST_STDIO USE_LARGE_FILES
USE_PERLIO
Built under openbsd
Compiled at May 4 2012 23:22:28
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="1531"
PERL5_CPANPLUS_IS_VERSION="0.9134"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Class-Lite-v0.1.0/blib/arch
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.