Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Inline-CPP-0.38_002 v5.15.5 GNU/Linux
Date: 2012-03-09T06:13:50Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear David J. Oswald,
This is a computer-generated report for Inline-CPP-0.38_002
on perl 5.15.5, created by CPAN-Reporter-1.2003.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
make[1]: Entering directory `/tmp/loop_over_bdir-uVGK7Y/Inline-CPP-0.38_002-DmkxUT/grammar'
make[1]: Leaving directory `/tmp/loop_over_bdir-uVGK7Y/Inline-CPP-0.38_002-DmkxUT/grammar'
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# $Config{osname}: linux
# $Config{cc}: cc
# $Config{gccversion}: 4.4.5
t/00load_prereqs.t .. ok
t/01fn_cans.t ....... ok
Had problems bootstrapping Inline module '_02basic_t_bc900f6'
Can't load '/home/sand/.Inline/lib/auto/_02basic_t_bc900f6/_02basic_t_bc900f6.so' for module _02basic_t_bc900f6: /home/sand/.Inline/lib/auto/_02basic_t_bc900f6/_02basic_t_bc900f6.so: undefined symbol: _ZNSt8ios_base4InitD1Ev at /home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/5.15.5/x86_64-linux-ld/DynaLoader.pm line 190.
at /home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/site_perl/5.15.5/Inline.pm line 536
at t/02basic.t line 33
BEGIN failed--compilation aborted at t/02basic.t line 91.
t/02basic.t .........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Had problems bootstrapping Inline module '_03prefix_t_4c6fcb4'
Can't load '/home/sand/.Inline/lib/auto/_03prefix_t_4c6fcb4/_03prefix_t_4c6fcb4.so' for module _03prefix_t_4c6fcb4: /home/sand/.Inline/lib/auto/_03prefix_t_4c6fcb4/_03prefix_t_4c6fcb4.so: undefined symbol: _ZNSt8ios_base4InitD1Ev at /home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/5.15.5/x86_64-linux-ld/DynaLoader.pm line 190.
at /home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/site_perl/5.15.5/Inline.pm line 536
at t/03prefix.t line 0
INIT failed--call queue aborted.
t/03prefix.t ........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Had problems bootstrapping Inline module '_04charptr_t_fa7db9d'
Can't load '/home/sand/.Inline/lib/auto/_04charptr_t_fa7db9d/_04charptr_t_fa7db9d.so' for module _04charptr_t_fa7db9d: /home/sand/.Inline/lib/auto/_04charptr_t_fa7db9d/_04charptr_t_fa7db9d.so: undefined symbol: _ZNSt8ios_base4InitD1Ev at /home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/5.15.5/x86_64-linux-ld/DynaLoader.pm line 190.
at /home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/site_perl/5.15.5/Inline.pm line 536
at t/04charptr.t line 0
INIT failed--call queue aborted.
t/04charptr.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/05pod.t ........... ok
Test Summary Report
-------------------
t/02basic.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/03prefix.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/04charptr.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=6, Tests=7, 7 wallclock secs ( 0.03 usr 0.01 sys + 2.76 cusr 0.43 csys = 3.23 CPU)
Result: FAIL
Failed 3/6 test programs. 0/7 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Inline 0.50 0.50
Inline::C 0.50 0.50
Parse::RecDescent 0 1.965001
build_requires:
Module Need Have
------------------- ---- --------
Test::More 0.98 0.98
configure_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 6.63_02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 2174
PERL5_CPAN_IS_RUNNING = 2174
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 123 1005
$EGID = 1005 123 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.120630
Cwd 3.37
ExtUtils::CBuilder 0.280204
ExtUtils::Command 1.17
ExtUtils::Install 1.57
ExtUtils::MakeMaker 6.63_02
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.05
File::Spec 3.34
JSON 2.53
JSON::PP 2.27200
Module::Build 0.39_01
Module::Signature 0.68
Parse::CPAN::Meta 1.4401
Test::Harness 3.23
Test::More 0.98
YAML 0.77
YAML::Syck 1.19
version 0.93
--
Summary of my perl5 (revision 5 version 15 subversion 5) configuration:
Commit id: 8fe0571645619844c3a4f2defc3990634138e838
Platform:
osname=linux, osvers=2.6.32-5-amd64, archname=x86_64-linux-ld
uname='linux k83 2.6.32-5-amd64 #1 smp thu nov 3 03:41:26 utc 2011 x86_64 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.11.2.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jan 14 2012 11:24:18
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="2174"
PERL5_CPAN_IS_RUNNING="2174"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/site_perl/5.15.5/x86_64-linux-ld
/home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/site_perl/5.15.5
/home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/5.15.5/x86_64-linux-ld
/home/src/perl/repoperls/installed-perls/perl/v5.15.5/127e/lib/5.15.5
.